RMC 系列容積同步頂升系統是基于“等容積”控制原理，即在相同的時間內給每個控制點輸出相同量的液壓油來實現同步控制的目的。控制過程無需考慮重物的中心分布，特別適用于小型千斤頂，RSM/RCS 超薄型千斤頂。

 The RMC series volume synchronous jacking system is based on the principle of "equal volume" control, which is to output the same amount of hydraulic oil to each control point in the same time to achieve the purpose of synchronous control.The control process does not need to consider the center distribution of heavy objects, especially for small jacks, RSM/RCS super-thin jacks.

 容積同步采用開環控制實現同步 ,所以在選型和高精密制造方面提出了很高的要求 ,但是由于其操作簡單、易于連接、系統穩定、精度高等優點 , 現今被廣泛使用在一些要求高精度、高效率的施工現場。

 The RMC series volume synchronous jacking system is based on the principle of "equal volume" control, which is to output the same amount of hydraulic oil to each control point in the same time to achieve the purpose of synchronous control.The control process does not need to consider thecenter distribution of heavy objects, especially for small jacks, RSM/RCS super-thin jacks.

特點：

采用了雙柱塞泵動力系統，實現了快速找平，重載平穩頂升。

Double plunger pump power system is adopted to achieve rapid leveling and heavy load leveling

控制精度高，同步精度可以達到 2mm，并且同步頂升和下降都可完全控制。

The control precision is high, the synchronous precision can reach 2mm, and the synchronous jacking and descending can be completely controlled.

產品應用靈活，可根據不同的使用工況、油缸噸位和數量、頂升精度進行靈活的聯機控制。

The product is flexible and can be controlled flexibly according to different working conditions, oil cylinder tonnage and quantity and jacking accuracy.

每個控制點相對獨立，可對一個或幾個控制點單獨調節，控制點之間互不干涉。

Each control point is relatively independent and can be adjusted independently to one or several control points without interference between the control points.

系統采用模塊化設計，可以控制 4、8、12、16，并且可以聯機控制擴展至 99 個點。

The system adopts modular design, which can control 4, 8, 12 and 16, and can be extended to 99 points online.

根據使用工況，可選用接入位移傳感器和壓力傳感器，對系統工況進行實時監控。

According to the working condition, the access displacement sensor and pressure sensor can be selected to monitor the system working condition in real time